Exterior Painting Contractor in Sacramento, CA
Professional exterior house painting for Sacramento homes — siding, stucco, trim, fascia, and wood surfaces prepared, primed, and finished with premium coatings built for Northern California sun and moisture.
Get Your Free Remodeling Estimate
Tell us what you'd like to improve. Our team will review your project and provide a clear, written estimate — no obligation.
A lasting paint job starts below the surface. We pressure-wash, scrape, sand, prime, and repair every substrate before a brush touches the wall — then apply premium Sherwin-Williams and Benjamin Moore coatings engineered for Northern California sun, moisture, and temperature swings.
Exterior Painting
A lasting paint job starts below the surface. We pressure-wash, scrape, sand, prime, and repair every substrate before a brush touches the wall — then apply premium Sherwin-Williams and Benjamin Moore coatings engineered for Northern California sun, moisture, and temperature swings.
Exterior painting is the most cost-effective way to protect and refresh your Sacramento home — but a finish that lasts is built on preparation, not just paint. At Apex Line Construction, our exterior house painting process begins below the surface: we pressure-wash every wall to remove dirt, chalk, mildew, and efflorescence; scrape and sand loose or failing coating; repair cracked stucco, damaged wood, and dry rot; caulk every gap and joint; and spot-prime bare substrate before any finish coat goes on. We paint every exterior surface on the home — fiber cement and wood siding, stucco and masonry, trim, fascia, soffits, eaves, doors, garage doors, and railings — using premium acrylic latex and elastomeric coatings from Sherwin-Williams and Benjamin Moore formulated for Northern California's intense UV exposure, winter moisture, and daily temperature swings. For stucco, we apply elastomeric coatings that bridge hairline cracks and shed wind-driven rain while remaining vapor-permeable, protecting the wall for 10–15 years. Proper preparation is what separates a paint job that fails in three years from one that lasts a decade. We never skip steps: loose paint is removed, bare wood is primed, stucco cracks are patched and meshed, and every surface is dry and sound before coating. We also coordinate any underlying repairs — dry rot replacement, siding repair, fascia rebuild, or flashing correction — so the new paint goes over a substrate that is actually ready to hold it. Whether your home needs a full re-paint to refresh faded color, a color change for a fresh look, or protective coating before listing, our exterior painting delivers a clean, uniform, weather-resistant finish that protects your home and elevates curb appeal for years. Free estimates, licensed and insured, serving Sacramento, Roseville, Folsom, Rocklin, Elk Grove, and the surrounding region.
Surface Preparation
Pressure washing, scraping, sanding, and priming — the preparation that determines how long the finish actually lasts.
Siding Painting
Fiber cement, wood, and composite siding painted with premium acrylic coatings for adhesion, coverage, and UV resistance.
Stucco & Masonry
Elastomeric coatings for stucco and masonry that bridge hairline cracks, shed wind-driven rain, and stay vapor-permeable for 10–15 years.
Trim, Fascia & Soffits
Detailed trim, fascia, soffit, and eave painting for a clean, consistent finish across the entire envelope.
Repairs Before Painting
Dry rot repair, wood replacement, stucco patching, and caulk correction completed before any finish coat is applied.
Premium Coatings
Sherwin-Williams and Benjamin Moore exterior coatings selected for Northern California sun, moisture, and temperature swings.
Every exterior painting project starts at the substrate — structural integrity before finish.
(916) 710-0283Elastomeric Paint for Stucco: Cost & Application Guide
Elastomeric paint is the highest-performance finish coating available for stucco exteriors in Sacramento and Northern California. Its thick, flexible membrane bridges moving hairline cracks, sheds wind-driven rain, and lasts 10–15 years — roughly double the lifespan of standard exterior paint on stucco. This guide covers real per-square-foot pricing, dry film thickness, the full application process, and when elastomeric is — and isn't — the right choice for your stucco home.
El Dorado Project — stucco re-coated with elastomeric paint
This two-story stucco home in El Dorado received a full elastomeric re-coat. The photos below document the preparation phase — the step that determines whether an elastomeric finish lasts a decade or fails in three years. Every window, the garage door opening, the front door, and the eave and roofline trim are masked with kraft paper and clear plastic sheeting secured with painter's tape to protect against overspray. A ladder spans from the driveway to the upper gable for high-wall access, and the stucco has been pressure-washed, crack-patched, and primed before the first finish coat is rolled.


After masking, hairline cracks in the stucco were routed and filled with elastomeric patch compound, a masonry bonding primer was applied to the chalky areas, and two finish coats of 100% acrylic elastomeric coating were back-rolled into the stucco texture while wet — building the 10–15 mil dry film that bridges moving cracks and sheds wind-driven rain while staying vapor-permeable. The result is a uniform, weather-resistant finish engineered to protect this El Dorado home for the next 10–15 years.
A flexible membrane, not just a color coat
Standard acrylic paint sits on the surface and cracks when stucco expands and contracts with temperature swings. Elastomeric paint stretches — bridging hairline cracks up to 1/16″ wide — while forming a wind-driven-rain-resistant barrier. Critically, it is also vapor-permeable, so moisture trapped behind the wall escapes rather than blistering the coating or rotting the framing. That combination of flexibility, waterproofing, and breathability is exactly what stucco needs in the Sacramento climate.
We apply premium 100% acrylic elastomeric coatings from Sherwin-Williams and Benjamin Moore, formulated for Northern California UV exposure, winter moisture, and daily temperature swings, at the 10–15 mil dry film thickness required for warranty-grade performance.
How elastomeric paint is applied to stucco
Inspect & assess the stucco substrate
We examine the stucco for active cracks, efflorescence, moisture intrusion, and the condition of any existing coating. Only sound, structurally stable stucco is a candidate for an elastomeric finish.
Pressure-wash & clean the surface
Dirt, chalk, mildew, and efflorescence are removed with a pressure wash so the coating bonds to the stucco — not to a layer of contamination.
Repair cracks & patch damage
Hairline and moving cracks are routed, filled with elastomeric patch compound, and meshed where needed. Larger structural cracks or stucco damage are repaired before any coating is applied.
Prime with a masonry bonding primer
A bonding primer is applied to chalky, porous, or previously painted areas to ensure adhesion and a uniform finish across the wall.
Apply two finish coats by back-rolling
Two coats of 100% acrylic elastomeric paint are applied and back-rolled into the stucco texture while wet, building a 10–15 mil dry film that bridges hairline cracks and sheds wind-driven rain.
Elastomeric paint cost for stucco
Pricing is per square foot of wall area and includes pressure washing, crack repair, primer, and two finish coats. Elastomeric costs more per gallon than standard paint, but its 10–15 year lifespan makes it the lower-cost choice over time for stucco.
Elastomeric paint for stucco — common questions
How much does elastomeric paint cost for stucco?
Elastomeric paint for stucco typically costs $3.00 to $7.50 per square foot, depending on wall area, substrate condition, crack repair, and access. Standard single-story stucco repaints run $3.00–$4.50/sq ft, while heavily cracked or multi-story walls with scaffold access reach $4.50–$6.00/sq ft. Commercial facades or extensive stucco restoration can reach $5.50–$7.50/sq ft. Elastomeric costs more per gallon than standard exterior paint, but its 10–15 year lifespan makes it the lower-cost choice over time for stucco exteriors.
How long does elastomeric paint last on stucco?
A properly applied elastomeric coating lasts 10–15 years on stucco — roughly double the lifespan of standard exterior paint on the same surface. Longevity depends on surface preparation, crack bridging, primer, dry film thickness (10–15 mils), and product quality. We use premium 100% acrylic elastomeric coatings from Sherwin-Williams and Benjamin Moore formulated for Northern California sun, moisture, and temperature swings to maximize service life.
Can elastomeric paint be applied over previously painted stucco?
Yes — if the existing paint is sound, well-adhered, and compatible. We pressure-wash to remove chalk, dirt, and efflorescence, scrape loose coating, spot-repair cracks, and apply a bonding primer before the elastomeric finish coats. If the existing paint is peeling, oil-based, or failing, it must be removed or the elastomeric will trap moisture and blister. We inspect every substrate and tell you honestly whether a recoat is safe.
Does elastomeric paint waterproof stucco?
Elastomeric paint forms a wind-driven-rain-resistant, flexible membrane that sheds water and bridges moving hairline cracks — effectively waterproofing the stucco surface. Critically, it is also vapor-permeable, so moisture trapped behind the wall can escape rather than blistering the coating or rotting the framing. It is not a substitute for repairing active leaks or structural cracking, but it is the most protective finish coating available for stucco.
How many coats of elastomeric paint are needed on stucco?
Two finish coats of elastomeric paint are required on stucco to reach the 10–15 mil dry film thickness that gives the coating its crack-bridging stretch and waterproofing. Each coat is back-rolled into the stucco texture while wet to ensure full adhesion and coverage. A bonding primer is applied first on chalky or previously painted surfaces. One coat is never sufficient for a warranty-grade elastomeric stucco finish.
When should you not use elastomeric paint on stucco?
Do not use elastomeric paint on stucco with active structural cracking, ongoing water intrusion behind the wall, or an oil-based coating that cannot be removed — no coating solves those problems. It is also not suited to smooth siding, wood, or non-masonry surfaces, where it can trap moisture and fail. We inspect the substrate first and only recommend elastomeric when the stucco is structurally sound and the moisture source is controlled.
Honest about when elastomeric isn't the answer
No coating solves active structural cracking, ongoing water intrusion behind the wall, or an oil-based finish that can't be removed. Elastomeric also isn't suited to smooth siding, wood, or non-masonry surfaces — there it can trap moisture and fail. We inspect the substrate first and only recommend elastomeric when the stucco is sound and the moisture source is controlled.
Exterior Painting in Detail
The value of professional exterior painting
Protection against UV fading, moisture intrusion, and weather damage for 8–15 years
Maximum curb appeal and property value with a clean, uniform finish
Repairs completed first so paint adheres to a sound, dry substrate
Premium coatings formulated for the Sacramento climate, not big-box paint
Exterior Painting Near Me — Serving Sacramento & Northern California
Searching for exterior painting near you? Apex Line Construction is a locally based Sacramento contractor serving homeowners and businesses throughout the Sacramento region, Sierra foothills, Bay Area, and Lake Tahoe. From Sacramento and Roseville to Folsom, Rocklin, Elk Grove, and beyond, our crews are nearby and ready to provide a free, no-obligation estimate for your exterior painting project.
Call (916) 710-0283Don't see your city? We serve 80+ communities across Northern California — view all service areas.
How your exterior painting project unfolds
Every project follows a structured path — from first consultation to final walkthrough — with clear communication and quality checks at every stage.
Consultation & Site Assessment
We visit your property, discuss your goals, assess existing conditions, and identify structural or material considerations specific to your project.
Design & Material Selection
We develop a clear scope of work, select materials suited to your space and budget, and provide a written estimate with no surprises.
Permitting & Scheduling
We handle permits, coordinate trades, and establish a construction schedule with clear milestones and communication throughout.
Construction & Project Management
Our crew executes the build with daily oversight, substrate-first methodology, and quality checks at every stage of construction.
Final Walkthrough & Handover
We walk through every detail together, address any punch-list items, and hand over a space built to perform for decades.
Exterior Painting FAQs
Straight answers about our exterior painting process, materials, and service.
Timeline depends on scope, but most exterior painting projects range from 2–6 weeks. We provide a detailed schedule during the estimation phase and keep you updated throughout construction.





